Model TC3020 Series Fiber Optic Mode Converter/Repeater - Data Rates from 20 bps to 10 Mbps F      TC302XS Standalone Unit 2 X TC302XR (Housed in TCRM196)                                                                                                                                   Features  Product or Application Questions (click here) Supports Burst and Continuous Data Data Rates up to 10 Mbps Distances up to 30km* Multimode & Single Mode (850/1300/1550nm) Multiple Diagnostic  LED Indicators Test Signal Generator Built-In Loopback Functions Local Dry Contact Alarm Relay Stand Alone or Rack Mount   TC3020 Series  TC3021  20 bps to 1 Mbps  TC3022  1 Mbps to 10 Mbps  TC3023      1.2 Kbps to 5 Mbps       Description Supporting data rates from 20 bps to 10 Mbps, the TC3020 Mode Converter Series convert, regenerate or extend 850nm, 1300nm or 1550nm wavelengths optical signals to distances up to 30 km*. The TC3021 supports "Bursty or Continuous" data rates from 20 bps to 1 Mbps.  It requires units at both ends and converts multimode to single mode, then back to multimode.  Must be used in pairs. (It will not convert single mode to multimode, then back to single mode). The TC3022 supports  "Bursty or Continuous" data rates from 1 Mbps to 10 Mbps.  It is a standalone converter (requires only one unit), and can convert from multimode to single mode, or vice versa.  The TC3023 supports "Bursty or Continuous" data rates from 1.2 Kbps to 5 Mbps.  It requires units at both ends and converts multimode to single mode, then back to multimode. Must be used in pairs. (It will not convert single mode to multimode, then back to single mode). Eleven LEDs are provided for diagnostics, monitoring optic signals in both directions and indicating system status.  A Test Signal Generator is available to help technicians conduct various installation tests including fiber link verifications.  A Dry Contact Relay Alarm is also provided as a standard feature. The TC3020 Series work with all popular types and sizes of fiber optic cable.  Fiber optic connectors are ST or FC type.  Power is 12VDC, optional 24VDC, -48VDC or 115/230VAC with an external power cube.  Hardened temperature versions (-20o to 70oC) are also available. TC302X Specifications Data Rates TC3021 30 bps to 1 Mbps TC3022 1 Mbps to 10 Mbps TC3023 1.2 Kbps to 5 Mbps Optical Transmitter LED/ELED Receiver PIN DIODE Wavelength 850nm or 1300nm Multimode   1310nm  Single Mode Fiber Optic connectors ST or FC Loss Budget  Multimode @ LED/ELED: 15dB Single Mode @ ELED: 20, 25 or 30dB  System Bit error rate 1 in l09 or better Power Power source I2VDC @200ma optional 115 or 230 VAC 24 VDC, 48 VDC Temperature Operating 00C to 500C Hi-Temp (optional)  -20° to 70°C Storage -400C to 900C Humidity 95% non-condensing Physical (Standalone/Wallmount Unit) Height (3.53 cm) 1.39" Width (18.13 cm) 7.14"  Depth (24.89 cm) 9.80" Weight (532 gm) 1.5 lbs.   Typical Application (Application Questions)  Fiber Optic Converter/Repeater Application Questionnaire (click here) The TC3020 Mode Converter Series is frequently used to convert multimode fiber optic cable to single mode, or vice versa, to connect various devices in Telephony or LAN communication environments.  This conversion is done to cross-connect different fiber types, regenerate optical signals and/or extend transmission distances.  It is also used for Burst Data applications.